Drive Cleaning

The surface is thoroughly prepared with our high-tech equipment by removing weeds, moss, algae and all stains, including oil. Most of the old sand from the edges of the pavers is also removed.

Sand is an important part of the structure, so kiln dried sterilised sand is carefully brushed into every joint, including alongside the house and walls. This increases the friction and distributes the load by helping to prevent damage to the sub-base that also causes sinking and spreading.

2 spray coats of low-slip resin sealer is now evenly applied, this solidifies the sand joints that prevents it from washing away by rain and wind. The surface is further protected against weed growth, stains and weather damage. The natural colours of the blocks are also enhanced.

Any broken mortar joints caused by frost, etc. can be refilled with a brush-in compound that is available in both buff or grey colours, to match your existing joint colour. This not only visually improves the paving, but also strengthens the structure and resists water ingress.

2 coats of resin sealer developed exclusively for paving and natural stone are spray applied to the surface and joints. The protective low-slip coating seals the paving stones and joints, protects the surface, shrugs off stains, oil, etc., inhibits weed regrowth and helps to prevent water and frost damage. The natural colours of the paving are also enhanced and the life of the paving is extended significantly.